Arduino 4 Buton, 4 Röle

int role_1 = 12;
int role_2 = 11;
int role_3 = 10;
int role_4 = 9;
int buton_1 = A1;
int buton_2 = A2;
int buton_3 = A3;
int buton_4 = A4;

void setup()
{
  pinMode(role_1, OUTPUT);
  pinMode(role_2, OUTPUT);
  pinMode(role_3, OUTPUT);
  pinMode(role_4, OUTPUT);
  pinMode(buton_1, INPUT);
  pinMode(buton_2, INPUT);
  pinMode(buton_3, INPUT);
  pinMode(buton_4, INPUT); 
}

void loop()
{
  if(digitalRead(buton_1) == HIGH && digitalRead(buton_2) == LOW && digitalRead(buton_3) == LOW && digitalRead(buton_4) == LOW) {digitalWrite(role_1, HIGH);}
  else
  {digitalWrite(role_1, LOW);}

  if(digitalRead(buton_1) == LOW && digitalRead(buton_2) == HIGH && digitalRead(buton_3) == LOW && digitalRead(buton_4) == LOW) {digitalWrite(role_2, HIGH);}
  else
  {digitalWrite(role_2, LOW);} 

  if(digitalRead(buton_1) == LOW && digitalRead(buton_2) == LOW && digitalRead(buton_3) == HIGH && digitalRead(buton_4) == LOW) {digitalWrite(role_3, HIGH);}
  else
  {digitalWrite(role_3, LOW);} 

  if(digitalRead(buton_1) == LOW && digitalRead(buton_2) == LOW && digitalRead(buton_3) == LOW && digitalRead(buton_4) == HIGH) {digitalWrite(role_4, HIGH);}
  else
  {digitalWrite(role_4, LOW);}   

}

Arduino:1.8.5 (Windows 10), Kart:"Arduino Nano, ATmega328P"

Çalışmanız programın 928 bayt (3 %) saklama alanını kullandı. Maksimum 30720 bayt.
Global değişkenler belleğin 9 byte kadarını  (0%) kullanıyor. Yerel değişkenler için 2039 byte yer kalıyor. En fazla 2048 byte kullanılabilir.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x2d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x2d
Karta yüklenirken sorun oluştu. Tavsiyeler için http://www.arduino.cc/en/Guide/Troubleshooting#upload adresine göz atabilirsiniz.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.