Hocam bu şekilde yazıyor ama ben yanlış anlamış olabilirim bir şeyleri :
Arkadaşlar ben uyanacağını anladım ama özel bir şey mi var:
12.9 Timer1/3/5 Operation During Sleep
Timer1/3/5 can only operate during Sleep when set up
in Asynchronous Counter mode. In this mode, an
external crystal or clock source can be used to
increment the counter. To set up the timer to wake the
device:
• TMRxON bit of the TxCON register must be set
• TMRxIE bit of the PIE1/2/5 register must be set
• PEIE/GIEL bit of the INTCON register must be set
• TxSYNC bit of the TxCON register must be set
• TMRxCS bits of the TxCON register must be
configured
• TxSOSCEN bit of the TxCON register must be
configured
The device will wake-up on an overflow and execute
the next instruction. If the GIE/GIEH bit of the INTCON
register is set, the device will call the Interrupt Service
Routine.
The secondary oscillator will continue to operate in
Sleep regardless of the TxSYNC bit setting.
Sleep komutu uygulamadığım zaman çalışıyor. Olmasa o zaman da çalışmaz.