enh direklerin tepe kuvvetleri

[spidy]

Merhaba arkadaşlar
ENH larda kullanılan boyalı galvanizli demir direklerde durdurucu (D-12, D-14..), Nihayet (N-12, N-14, N-16...) ve zaviye (Z-12, Z-14,...) direkleri için tepe kuvvetlerini bilen varsa lütfen paylaşabilir mi..aramadığım yer kalmadı bulamadım bir türlü..

 

[ampera]

saglam bilgi istiyorsanız atilla yunusoglu nun ORTA GERİLİM kitabı var ordan yararlanabılırsınız..

 

[lecuyk]

buyur arkadaş

O.G. ENH DEMİR DİREKLER

DİREK TİPİ BOY AĞIR. TEPE DİP DİKMELER ÇAPRAZ ÇAP. ADEDİ NOR. TEMEL KAY. TEMEL
ALT OR. 6 Mt. ÜST 6 Mt.
T-10 10 258 20 45 50.50.5 - 50.50.5 40.40.4 15 1.60 1.25
T-12 12 306 20 50 50.50.5 - 50.50.5 40.40.4 18 1.60 1.25
T-14 14 370 20 55 50.50.5 50.50.5 50.50.5 40.40.4 22 1.60 1.25
T-16 16 426 20 60 50.50.5 50.50.5 50.50.5 40.40.4 25 1.60 1.25

D-10 10 279 35 85 50.50.5 - 50.50.5 40.40.4 15 1.90 1.25
D-12 12 344 35 95 50.50.5 - 50.50.5 40.40.4 18 1.90 1.25
D-14 14 418 35 105 60.60.6 50.50.5 50.50.5 40.40.4 21 1.90 1.25
D-16 16 506 35 115 60.60.6 50.50.5 50.50.5 40.40.4 24 1.90 1.25

N-10 10 293 35 100 60.60.6 - 50.50.5 40.40.4 16 1.90 1.25
N-12 12 366 35 113 60.60.6 - 50.50.5 40.40.4 20 1.90 1.25
N-14 14 448 35 126 60.60.6 60.60.6 50.50.5 40.40.4 23 1.90 1.40
N-16 16 542 35 139 60.60.6 60.60.6 50.50.5 40.40.4 26 1.90 1.50

Z-10 10 338 40 110 60.60.6 - 50.50.5 40.40.4 18 1.90 1.25
Z-12 12 420 40 124 60.60.6 - 50.50.5 40.40.4 21 1.90 1.25
Z-14 14 510 40 138 60.60.6 60.60.6 50.50.5 40.40.4 25 1.90 1.40
Z-16 16 600 40 152 60.60.6 60.60.6 50.50.5 40.40.4 28 1.90 1.50

 

[bamsıbeyrek]

buyur arkadaş

O.G. ENH DEMİR DİREKLER

DİREK TİPİ BOY AĞIR. TEPE DİP DİKMELER ÇAPRAZ ÇAP. ADEDİ NOR. TEMEL KAY. TEMEL
ALT OR. 6 Mt. ÜST 6 Mt.
T-10 10 258 20 45 50.50.5 - 50.50.5 40.40.4 15 1.60 1.25
T-12 12 306 20 50 50.50.5 - 50.50.5 40.40.4 18 1.60 1.25
T-14 14 370 20 55 50.50.5 50.50.5 50.50.5 40.40.4 22 1.60 1.25
T-16 16 426 20 60 50.50.5 50.50.5 50.50.5 40.40.4 25 1.60 1.25

D-10 10 279 35 85 50.50.5 - 50.50.5 40.40.4 15 1.90 1.25
D-12 12 344 35 95 50.50.5 - 50.50.5 40.40.4 18 1.90 1.25
D-14 14 418 35 105 60.60.6 50.50.5 50.50.5 40.40.4 21 1.90 1.25
D-16 16 506 35 115 60.60.6 50.50.5 50.50.5 40.40.4 24 1.90 1.25

N-10 10 293 35 100 60.60.6 - 50.50.5 40.40.4 16 1.90 1.25
N-12 12 366 35 113 60.60.6 - 50.50.5 40.40.4 20 1.90 1.25
N-14 14 448 35 126 60.60.6 60.60.6 50.50.5 40.40.4 23 1.90 1.40
N-16 16 542 35 139 60.60.6 60.60.6 50.50.5 40.40.4 26 1.90 1.50

Z-10 10 338 40 110 60.60.6 - 50.50.5 40.40.4 18 1.90 1.25
Z-12 12 420 40 124 60.60.6 - 50.50.5 40.40.4 21 1.90 1.25
Z-14 14 510 40 138 60.60.6 60.60.6 50.50.5 40.40.4 25 1.90 1.40
Z-16 16 600 40 152 60.60.6 60.60.6 50.50.5 40.40.4 28 1.90 1.50

TEPE KUVVETİ İÇERİSİNDE YOK ?